Headlines on ccie lab tipsIPIPGW Gatekeeper lookup
Sun, 13 Aug 2006 16:26:01 +0000
When using IPIPGW, you need to define a zone prefix to route calls. invia zones does not use the default technology.
A workbook Blueprint
Sun, 20 Jul 2008 11:43:29 +0000
So now and then I see the question popping up about which R&S Lab workbook is the best. I will ask a different question: Is there a way to objectively measure an R&S Lab workbook?
You have probably read this again and again; it is all about the technologies! So, one of the most important workbook would ...]
Show isdn service
Mon, 18 Sep 2006 04:19:34 +0000
To find out which channels are in service, which are out of service, use command,
sh isdn service. Here is a sample output from a Cisco IOS router.
BR1#sh isdn service
PRI Channel Statistics:
%Q.931 is backhauled to CCM MANAGER 0×0003 on DSL 0. Layer 3 output may not appl
y
ISDN Se0/0/1:23, Channel 1-24]
Configured Isdn Interface (dsl) 0
Channel ...]
Khawar Butt’s lab 1.2 topology on Dynamips
Tue, 22 Apr 2008 18:33:15 +0000
This image is purposely small, please purchase Khawars CCIE Security Workbook.
Please review my previous post on my lab setup to fully understand how everything physically fits together http://cciesecurity.wordpress.com/2006/12/21/my-home-lab/
This design was fairly easy to reproduce with dynamips. Like 1.1 it consists of routers ans firewalls.
Switch config:
#2950 switch port setup
#f0/1 = dynamips breakout trunk
#f0/2 = pix inside ...]
We have avoided repetitions of any sort in the matter on ccie lab tips. However, if you do come across any repetitions, do bear with us.
ccie
cisco aironet | cisco asa | cisco bcmsn | cisco bcran
Labels: www internetworkexpert com | www ipexpert | www ipexpert com
