Another short cisco ccnp boot camp review
NANOG impressions
Wed, 15 Oct 2008 04:30:06 +0000
Just a quick blurb on NANOG, which ends tomorrow technically, but is pretty much over (just doing breakfast). One coworker was unhappy with the amount of new and educational material presented. He was right, there wasn’t that much new and hardcore information. But there isn’t supposed to be. NANOG is about schmoozing and making contacts, ...]
This Year's 25 Geekiest 25th Anniversaries Slideshow] 409]
MoH server using Trancoder
Sat, 12 Aug 2006 02:37:19 +0000
If the remote device does not support the codec of the MOH stream, then MOH server can trigger a transcoder. You would need to configure a MRGL with transcoder resource in the MoH servers device pool. In this case, CCM does not use the trancoder of the remote device. It will only use the transcoder ...]
CME-CUE on two different routers
Fri, 14 Jul 2006 01:01:35 +0000
If you need to integrate CME with a CUE on a different chassis, you would need the following.
1. Create a h323 dial-peer in CME gateway and point it to the gateway that hosts CUE.
2. Create a SIP dial-peer in the gateway that hosts CUE to point to CUE ip address.
You cannot create a SIP dial-peer ...]
Why CUE integration with CCM doesn’t need MWI numbers?
Thu, 20 Jul 2006 14:38:00 +0000
Since Cisco Unity Express uses JTAPI to interface with the Cisco CallManager, no MWI on and off numbers need be configured.
ccie
ccie 350 001
ccie assessor lab
ccie books
cisco specialist | cisco study guide
Labels: net130 ccie | net130 ccie | network simulator | network simulator